Javier - your new JD

[Srgnt Billko]

"Javier" <javier@invalid.invalid> wrote in message
news:e0rcdh$17ki$1@stationair.kjsl.com...
> Srgnt Billko wrote:
>> "Javier" <javier@invalid.invalid> wrote in message
>> news:e0ku53$2aut$1@stationair.kjsl.com...
>>>> Congratulations - have fun !!
>>> So, I drove it this afternoon after I got home. It runs, it mows, and it
>>> mulches. I guess I can't complain too much.
>>>
>>> The ride sure is -stiff- though.
>>
>> Your behind is too sensitive. Check the air pressure in the tires and
>> make
>> sure they were not over-inflated. Might as well check the oil too while
>> you're at it. (just to make sure)
>
> How does the oil affect the quality of the ride?
>
> The tire pressure matches what's printed on the tire sidewalls, so I
> guess it's OK.
>
> -jav

Check the tire pressure in your owner's manual. MY JD 110 lists 6 to 16 psi
in front and 5 to 10 psi in rear.

Oil has nothing to do with it. I just don't trust the kids they have
setting these machines up. Check to make sure there is enough and that they
did not overfill.

[Javier]

> Check the tire pressure in your owner's manual. MY JD 110 lists 6 to 16 psi
> in front and 5 to 10 psi in rear.

Well, the manual says to look at what's on the tire sidewalls. Go
figure! This is a JD 125.

> Oil has nothing to do with it. I just don't trust the kids they have
> setting these machines up. Check to make sure there is enough and that they
> did not overfill.

Oh, OK. Yeah, I checked the oil before firing it for the first time, it
was at the proper level.

-jav

[KCnRichmond]

>
> Oil has nothing to do with it. I just don't trust the kids they have
> setting these machines up. Check to make sure there is enough and that
> they did not overfill.
>
Kids.. What kids? JD's are post delivered by an actual JD mechanic on site.
A 10 point inspection is done and their local JD dealer sticker is put on
the tractor for you to call with any problems. Everything else is assembled
by an "assembly" kid at the store level, which can be from just the seat to
seat , steering wheel, and battery.

[Srgnt Billko]

"KCnRichmond" <k.cutlip@worldnet.att.net> wrote in message
news:QIMYf.62166$bn3.26944@bgtnsc04-news.ops.worldnet.att.net...
> >
>> Oil has nothing to do with it. I just don't trust the kids they have
>> setting these machines up. Check to make sure there is enough and that
>> they did not overfill.
>>
> Kids.. What kids? JD's are post delivered by an actual JD mechanic on
> site. A 10 point inspection is done and their local JD dealer sticker is
> put on the tractor for you to call with any problems. Everything else is
> assembled by an "assembly" kid at the store level, which can be from just
> the seat to seat , steering wheel, and battery.

I'm not that gullible. And I doubt if an "actual mechanic" is putting the
oil in these things. But I did have an "actual mechanic" overfill my new
Jeep at the local dealer a couple years ago. Our "local JD dealer" is about
20 miles from the store.

But you bring up a good point. If some "assembly kid" put the seat on and
it's riding stiff I'd check to see if the seat is attached correctly.

[Javier]

Srgnt Billko wrote:
> "KCnRichmond" <k.cutlip@worldnet.att.net> wrote in message
> news:QIMYf.62166$bn3.26944@bgtnsc04-news.ops.worldnet.att.net...
>>> Oil has nothing to do with it. I just don't trust the kids they have
>>> setting these machines up. Check to make sure there is enough and that
>>> they did not overfill.
>>>
>> Kids.. What kids? JD's are post delivered by an actual JD mechanic on
>> site. A 10 point inspection is done and their local JD dealer sticker is
>> put on the tractor for you to call with any problems. Everything else is
>> assembled by an "assembly" kid at the store level, which can be from just
>> the seat to seat , steering wheel, and battery.
>
> I'm not that gullible. And I doubt if an "actual mechanic" is putting the
> oil in these things. But I did have an "actual mechanic" overfill my new
> Jeep at the local dealer a couple years ago. Our "local JD dealer" is about
> 20 miles from the store.
>
> But you bring up a good point. If some "assembly kid" put the seat on and
> it's riding stiff I'd check to see if the seat is attached correctly.
>


It seems to be, it's resting on the springs.

This is the first riding mower I've ever operated, it's quite possible
that the ride is as expected, and I'm just not used to it.

-jav