Arkitekt
10-27-2004, 07:12 PM
So you can navigate the World Wide Web but you still don't know how to screw in a lightbulb? Follow these directions and let there be light.
Steps:
1. Turn off the lamp or light fixture.
2. Allow a hot bulb to cool before touching it.
3. Grasp the bulb lightly but firmly and turn counterclockwise until it is released from the socket.
4. Insert a replacement bulb lightly but firmly into the socket, and turn it clockwise until it's snug.
5. Turn the lamp or fixture back on.
6. Dispose of the used bulb.
Steps:
1. Turn off the lamp or light fixture.
2. Allow a hot bulb to cool before touching it.
3. Grasp the bulb lightly but firmly and turn counterclockwise until it is released from the socket.
4. Insert a replacement bulb lightly but firmly into the socket, and turn it clockwise until it's snug.
5. Turn the lamp or fixture back on.
6. Dispose of the used bulb.