How to get rid of mold on Garden Hose?

[captmikey@hotmelt.com]

Anyone have a solution to get rid of those ugly black spots that
accumulate on a hose that is wrapped around one of those wind-up
devices? I guess water drips in/around the hose and seeing as it's
probably darker in the middle/end, the hose gets ugly and uglier after
you pull the first 25 feet out. The outer length stays nice, and this
hose is maybe 2 years old... no leaks, cracks or whatever, but the
missus wants me to clean it.

Thought about bleach, but will that actually attack the vinyl and make
it sticky? Looking for a solution that costs less than tossing the
hose and buying a new one when other than the black spots... there's
nothing wrong with it.

TIA! Mike

[Doug Kanter]

Try white vinegar, or put on some rubber gloves and attack it with Lysol.

<captmikey@hotmelt.com> wrote in message
news:jd0s91hjs25gsupca780dh82auuh0629eh@4ax.com...
> Anyone have a solution to get rid of those ugly black spots that
> accumulate on a hose that is wrapped around one of those wind-up
> devices? I guess water drips in/around the hose and seeing as it's
> probably darker in the middle/end, the hose gets ugly and uglier after
> you pull the first 25 feet out. The outer length stays nice, and this
> hose is maybe 2 years old... no leaks, cracks or whatever, but the
> missus wants me to clean it.
>
> Thought about bleach, but will that actually attack the vinyl and make
> it sticky? Looking for a solution that costs less than tossing the
> hose and buying a new one when other than the black spots... there's
> nothing wrong with it.
>
> TIA! Mike

[Warren]

captmikey@hotmelt.com wrote:
> Anyone have a solution to get rid of those ugly black spots that
> accumulate on a hose that is wrapped around one of those wind-up
> devices? I guess water drips in/around the hose and seeing as it's
> probably darker in the middle/end, the hose gets ugly and uglier after
> you pull the first 25 feet out. The outer length stays nice, and this
> hose is maybe 2 years old... no leaks, cracks or whatever, but the
> missus wants me to clean it.

Cleaning it is only a temporary fix. It's going to keep coming back until
you take care of the cause. Find the leak, and fix it. Unroll the hose, and
let it sit in the air and the sunlight to let the anaerobic mold die. Then
wipe it off with a rag dampened with detergent, and let it dry completely
before rolling it up again. If you fixed the moisture problem, the mold
won't come back. If you didn't fix the moisture problem, it really doesn't
matter what you clean it with because the mold will come back.

--
Warren H.

==========
Disclaimer: My views reflect those of myself, and not my
employer, my friends, nor (as she often tells me) my wife.
Any resemblance to the views of anybody living or dead is
coincidental. No animals were hurt in the writing of this
response -- unless you count my dog who desperately wants
to go outside now.
What's on TV? See the new fall network schedules online:
http://www.holzemville.com/mall/television/fall2005.html

[Doug Kanter]

Try white vinegar, or put on some rubber gloves and attack it with Lysol.

<captmikey@hotmelt.com> wrote in message
news:jd0s91hjs25gsupca780dh82auuh0629eh@4ax.com...
> Anyone have a solution to get rid of those ugly black spots that
> accumulate on a hose that is wrapped around one of those wind-up
> devices? I guess water drips in/around the hose and seeing as it's
> probably darker in the middle/end, the hose gets ugly and uglier after
> you pull the first 25 feet out. The outer length stays nice, and this
> hose is maybe 2 years old... no leaks, cracks or whatever, but the
> missus wants me to clean it.
>
> Thought about bleach, but will that actually attack the vinyl and make
> it sticky? Looking for a solution that costs less than tossing the
> hose and buying a new one when other than the black spots... there's
> nothing wrong with it.
>
> TIA! Mike

[Warren]

captmikey@hotmelt.com wrote:
> Anyone have a solution to get rid of those ugly black spots that
> accumulate on a hose that is wrapped around one of those wind-up
> devices? I guess water drips in/around the hose and seeing as it's
> probably darker in the middle/end, the hose gets ugly and uglier after
> you pull the first 25 feet out. The outer length stays nice, and this
> hose is maybe 2 years old... no leaks, cracks or whatever, but the
> missus wants me to clean it.

Cleaning it is only a temporary fix. It's going to keep coming back until
you take care of the cause. Find the leak, and fix it. Unroll the hose, and
let it sit in the air and the sunlight to let the anaerobic mold die. Then
wipe it off with a rag dampened with detergent, and let it dry completely
before rolling it up again. If you fixed the moisture problem, the mold
won't come back. If you didn't fix the moisture problem, it really doesn't
matter what you clean it with because the mold will come back.

--
Warren H.

==========
Disclaimer: My views reflect those of myself, and not my
employer, my friends, nor (as she often tells me) my wife.
Any resemblance to the views of anybody living or dead is
coincidental. No animals were hurt in the writing of this
response -- unless you count my dog who desperately wants
to go outside now.
What's on TV? See the new fall network schedules online:
http://www.holzemville.com/mall/television/fall2005.html

[Warren]

captmikey@hotmelt.com wrote:
> Anyone have a solution to get rid of those ugly black spots that
> accumulate on a hose that is wrapped around one of those wind-up
> devices? I guess water drips in/around the hose and seeing as it's
> probably darker in the middle/end, the hose gets ugly and uglier after
> you pull the first 25 feet out. The outer length stays nice, and this
> hose is maybe 2 years old... no leaks, cracks or whatever, but the
> missus wants me to clean it.

Cleaning it is only a temporary fix. It's going to keep coming back until
you take care of the cause. Find the leak, and fix it. Unroll the hose, and
let it sit in the air and the sunlight to let the anaerobic mold die. Then
wipe it off with a rag dampened with detergent, and let it dry completely
before rolling it up again. If you fixed the moisture problem, the mold
won't come back. If you didn't fix the moisture problem, it really doesn't
matter what you clean it with because the mold will come back.

--
Warren H.

==========
Disclaimer: My views reflect those of myself, and not my
employer, my friends, nor (as she often tells me) my wife.
Any resemblance to the views of anybody living or dead is
coincidental. No animals were hurt in the writing of this
response -- unless you count my dog who desperately wants
to go outside now.
What's on TV? See the new fall network schedules online:
http://www.holzemville.com/mall/television/fall2005.html

[Warren]

captmikey@hotmelt.com wrote:
> Anyone have a solution to get rid of those ugly black spots that
> accumulate on a hose that is wrapped around one of those wind-up
> devices? I guess water drips in/around the hose and seeing as it's
> probably darker in the middle/end, the hose gets ugly and uglier after
> you pull the first 25 feet out. The outer length stays nice, and this
> hose is maybe 2 years old... no leaks, cracks or whatever, but the
> missus wants me to clean it.

Cleaning it is only a temporary fix. It's going to keep coming back until
you take care of the cause. Find the leak, and fix it. Unroll the hose, and
let it sit in the air and the sunlight to let the anaerobic mold die. Then
wipe it off with a rag dampened with detergent, and let it dry completely
before rolling it up again. If you fixed the moisture problem, the mold
won't come back. If you didn't fix the moisture problem, it really doesn't
matter what you clean it with because the mold will come back.

--
Warren H.

==========
Disclaimer: My views reflect those of myself, and not my
employer, my friends, nor (as she often tells me) my wife.
Any resemblance to the views of anybody living or dead is
coincidental. No animals were hurt in the writing of this
response -- unless you count my dog who desperately wants
to go outside now.
What's on TV? See the new fall network schedules online:
http://www.holzemville.com/mall/television/fall2005.html

[Rolling Thunder]

On Wed, 01 Jun 2005 14:48:08 -0400, captmikey@hotmelt.com wrote:

>Anyone have a solution to get rid of those ugly black spots that
>accumulate on a hose that is wrapped around one of those wind-up
>devices? I guess water drips in/around the hose and seeing as it's
>probably darker in the middle/end, the hose gets ugly and uglier after
>you pull the first 25 feet out. The outer length stays nice, and this
>hose is maybe 2 years old... no leaks, cracks or whatever, but the
>missus wants me to clean it.
>
>Thought about bleach, but will that actually attack the vinyl and make
>it sticky? Looking for a solution that costs less than tossing the
>hose and buying a new one when other than the black spots... there's
>nothing wrong with it.
>
>TIA! Mike

Try deck cleaner. Worked on a lawn chair with mold on the plastic.

Thunder