BeyerIII
06-08-2005, 07:53 PM
Over the past several weeks I have been working on a way to clean roof gutters
from the ground. What I have created so far is using 2" and 1 1/2" PVC drain
pipe with a spiraling 1 1/2" 90 degree turn on top, and 45 degree handle on
the end attached to a leaf blower for blowing out leaves or a vacuum to pick up
leaves.
This device is is followed by a high pressure water nozzle to flush out the
leaves.
Please let me know if you are interested in learning more about this device,
Sincerely,
Malcolm Keller Beyer III
BeyerIII(At)Aol.com
from the ground. What I have created so far is using 2" and 1 1/2" PVC drain
pipe with a spiraling 1 1/2" 90 degree turn on top, and 45 degree handle on
the end attached to a leaf blower for blowing out leaves or a vacuum to pick up
leaves.
This device is is followed by a high pressure water nozzle to flush out the
leaves.
Please let me know if you are interested in learning more about this device,
Sincerely,
Malcolm Keller Beyer III
BeyerIII(At)Aol.com