View Full Version : Bruce's GSR Cleans Water Spots
Bill Shaheen
06-08-2005, 08:02 PM
After several days of trying every concotion imaginable to remove the
hardwater deposits from our glass block shower stall, we tried Bruce's
GSR Glass Water Spot & Stain Remover, which I found at the local ACE
hardware.
Also found their website: http://www.brucesgsr.com/
Used with 0000 steel wool, it removed the spots entirely, albeit with
a couple passes of heavy scouring. But, it was a 5-year buildup.
I suspect the mineral deposits may have actually been etched into the
glass and that in fact I was polishing a layer away, rather than
removing a deposit.
At any rate, the glass looks terrific.
Bill in Cave Creek, AZ.
Vox Humana
06-08-2005, 08:02 PM
"Bill Shaheen" <WJShaheen@aol.com> wrote in message
news:9d885d10.0402081151.5cedf0c6@posting.google.c om...
> After several days of trying every concotion imaginable to remove the
> hardwater deposits from our glass block shower stall, we tried Bruce's
> GSR Glass Water Spot & Stain Remover, which I found at the local ACE
> hardware.
>
> Also found their website: http://www.brucesgsr.com/
>
> Used with 0000 steel wool, it removed the spots entirely, albeit with
> a couple passes of heavy scouring. But, it was a 5-year buildup.
>
> I suspect the mineral deposits may have actually been etched into the
> glass and that in fact I was polishing a layer away, rather than
> removing a deposit.
How can deposits be etched into something?
Phisherman
06-08-2005, 08:02 PM
On 8 Feb 2004 11:51:33 -0800, WJShaheen@aol.com (Bill Shaheen) wrote:
>After several days of trying every concotion imaginable to remove the
>hardwater deposits from our glass block shower stall, we tried Bruce's
>GSR Glass Water Spot & Stain Remover, which I found at the local ACE
>hardware.
>
>Also found their website: http://www.brucesgsr.com/
>
>Used with 0000 steel wool, it removed the spots entirely, albeit with
>a couple passes of heavy scouring. But, it was a 5-year buildup.
>
>I suspect the mineral deposits may have actually been etched into the
>glass and that in fact I was polishing a layer away, rather than
>removing a deposit.
>
>At any rate, the glass looks terrific.
>
>Bill in Cave Creek, AZ.
Ouch! Steel wool will scratch glass. An acid or CLR should have
dissolved the deposits. You could scrub glass with a nylon brush or
net without concern about scratches.
vBulletin v3.6.2, Copyright ©2000-2009, Jelsoft Enterprises Ltd.