Windows

[pixi]

Hope someone can help me on this. I cannot get my windows clean. I wash
them 5 or 6 times, using different combinations of cleaners,one time right
after the other and they still look cloudy.

Yesterday I went after them yet again. One window in particular had cloudy
smudges. So I got a razor blade and scraped the smudges. Sure enough,
there was a fine film on it that scraped off. Unfortunately this window is
on the second floor and is a slider (never again will I have a slider) so I
cannot get to part of the window from the inside.

I don't know what this film can be. We have a paper mill about 20 miles
west of us, the fumes from which sometimes reach us. And there is a
powerplant perhaps 10 miles to the west. Other than that there is no
industry. We are in the mountains where the air is supposed to be fresh and
clean.

I could scrape all of the ground floor windows but the second floor is
beyond me. I am too old to be climbing ladders.

Does anyone have any recommendation for some kind of cleaner that will cut
this film?

Pixi

[Phisherman]

On Tue, 20 Jul 2004 06:39:32 -0400, "pixi" <pixi@hardynet.com> wrote:

>Hope someone can help me on this. I cannot get my windows clean. I wash
>them 5 or 6 times, using different combinations of cleaners,one time right
>after the other and they still look cloudy.
>
>Yesterday I went after them yet again. One window in particular had cloudy
>smudges. So I got a razor blade and scraped the smudges. Sure enough,
>there was a fine film on it that scraped off. Unfortunately this window is
>on the second floor and is a slider (never again will I have a slider) so I
>cannot get to part of the window from the inside.
>
>I don't know what this film can be. We have a paper mill about 20 miles
>west of us, the fumes from which sometimes reach us. And there is a
>powerplant perhaps 10 miles to the west. Other than that there is no
>industry. We are in the mountains where the air is supposed to be fresh and
>clean.
>
>I could scrape all of the ground floor windows but the second floor is
>beyond me. I am too old to be climbing ladders.
>
>Does anyone have any recommendation for some kind of cleaner that will cut
>this film?
>
>Pixi

I would not scrape windows as this could easily scratch them. First,
I'd try vinegar spray and paper towels, followed up by household
ammonia and paper towels. If that doesn't remove the film, try CLR.
Paper plants use a variety of chemicals, including sulfur compounds
and strong alkalines (A long time ago Phish used to work for an
engineering firm that designed and engineered paper refineries,
hydrocyclones and digesters.)

[pixi]

Thank you. I've tried alcohol (those windows almost lead me to drink it)
and vinegar and just about everything I can think of.

What is CLR?

So you think it's the paper mill? I have lived in a lot of places including
industrial areas and have never before had such dirty windows!

Thanks again.

[Phisherman]

On Tue, 20 Jul 2004 17:45:24 -0400, "pixi" <pixi@hardynet.com> wrote:

>Thank you. I've tried alcohol (those windows almost lead me to drink it)
>and vinegar and just about everything I can think of.
>
>What is CLR?
>
>So you think it's the paper mill? I have lived in a lot of places including
>industrial areas and have never before had such dirty windows!
>
>Thanks again.
>
>
The alcohol was a good try. CLR is a liquid product (stands for
Calcium Lime Rust) dispensed in a gray plastic bottle. It is not
something you want to get on your skin or in your eyes.

Try kerosene. If the window film is paint, this may work. Although
flammable, it is not highly poisonous and kind to the skin. If this
works, you'll need to wash off the kerosene (alcohol followed up with
Windex should work).

You could try acetone. This is a powerful solvent sold in metal cans.
It is flammable, poisonous and dries very quickly. Some nail polish
removers contain acetone, so you could try that in a small amount just
to see if acetone works.

Talk to your neighbors and ask them if they have a window film.

[The Data Rat]

How about a steamer? They are really cheap now and could probably blast
that stuff right off!

Suzi
"pixi" <pixi@hardynet.com> wrote in message
news:cdisn5$5dgp$1@news3.infoave.net...
> Hope someone can help me on this. I cannot get my windows clean. I wash
> them 5 or 6 times, using different combinations of cleaners,one time right
> after the other and they still look cloudy.
>
> Yesterday I went after them yet again. One window in particular had
cloudy
> smudges. So I got a razor blade and scraped the smudges. Sure enough,
> there was a fine film on it that scraped off. Unfortunately this window
is
> on the second floor and is a slider (never again will I have a slider) so
I
> cannot get to part of the window from the inside.
>
> I don't know what this film can be. We have a paper mill about 20 miles
> west of us, the fumes from which sometimes reach us. And there is a
> powerplant perhaps 10 miles to the west. Other than that there is no
> industry. We are in the mountains where the air is supposed to be fresh
and
> clean.
>
> I could scrape all of the ground floor windows but the second floor is
> beyond me. I am too old to be climbing ladders.
>
> Does anyone have any recommendation for some kind of cleaner that will cut
> this film?
>
> Pixi
>
>
>
>
>
>