PDA

View Full Version : Bathtub Tile Cleaning?


builderbos
06-08-2005, 08:41 PM
I've used bleach comet against my best intentions with very good
results, but have been told it's too abrasive to use for this kind of
application.

Any suggestions on whether or not it IS too abrasive, and/or any
alternatives? The tiles are dirty with (basically) soap-scum type of
dirt. The comet seems to readily restore the light blue color ridding
us of the brownish caking, and doesn't seem to scratch at all...but
perhaps it is.

Any/all advice much appreciated, thanks.

Thanks.

Phisherman
06-08-2005, 08:41 PM
There are non-abrasive cleaners available. I like to use a
tile-and-tub pressurized foam spray. I spray it on, allow it to work
for several hours, use a nylon-bristle scrub brush dipped in
household ammonia, and rinse with cold water. Doing this once a week
prevents hard-to-clean buildup. My tub/shower surround is a one-piece
fiberglass. I use a pump after-shower spray too. My clear vinyl
shower curtain goes in the laundry with rags, old towels, and
household bleach once a month. About 4 times a year I'll polish the
chrome fixtures using Brasso that makes them look like new.

On 11 Apr 2005 09:57:02 -0700, "builderbos" <builderbos@yahoo.com>
wrote:

>I've used bleach comet against my best intentions with very good
>results, but have been told it's too abrasive to use for this kind of
>application.
>
>Any suggestions on whether or not it IS too abrasive, and/or any
>alternatives? The tiles are dirty with (basically) soap-scum type of
>dirt. The comet seems to readily restore the light blue color ridding
>us of the brownish caking, and doesn't seem to scratch at all...but
>perhaps it is.
>
>Any/all advice much appreciated, thanks.
>
>Thanks.

builderbos
06-08-2005, 08:41 PM
Thank you, I will keep this method in mind.

I've been told to avoid the nylon bristle, yet I use one anyway, as
they seem so highly effective and I have yet to see scratches.

Phisherman wrote:
> There are non-abrasive cleaners available. I like to use a
> tile-and-tub pressurized foam spray. I spray it on, allow it to work
> for several hours, use a nylon-bristle scrub brush dipped in
> household ammonia, and rinse with cold water. Doing this once a week
> prevents hard-to-clean buildup. My tub/shower surround is a
one-piece
> fiberglass. I use a pump after-shower spray too. My clear vinyl
> shower curtain goes in the laundry with rags, old towels, and
> household bleach once a month. About 4 times a year I'll polish the
> chrome fixtures using Brasso that makes them look like new.
>
> On 11 Apr 2005 09:57:02 -0700, "builderbos" <builderbos@yahoo.com>
> wrote:
>
> >I've used bleach comet against my best intentions with very good
> >results, but have been told it's too abrasive to use for this kind
of
> >application.
> >
> >Any suggestions on whether or not it IS too abrasive, and/or any
> >alternatives? The tiles are dirty with (basically) soap-scum type
of
> >dirt. The comet seems to readily restore the light blue color
ridding
> >us of the brownish caking, and doesn't seem to scratch at all...but
> >perhaps it is.
> >
> >Any/all advice much appreciated, thanks.
> >
> >Thanks.

win-ho-lee
06-08-2005, 08:41 PM
Phisherman wrote:
> There are non-abrasive cleaners available. I like to use a
> tile-and-tub pressurized foam spray. I spray it on, allow it to work
> for several hours, use a nylon-bristle scrub brush dipped in
> household ammonia, and rinse with cold water. Doing this once a week
> prevents hard-to-clean buildup. My tub/shower surround is a one-piece
> fiberglass. I use a pump after-shower spray too. My clear vinyl
> shower curtain goes in the laundry with rags, old towels, and
> household bleach once a month. About 4 times a year I'll polish the
> chrome fixtures using Brasso that makes them look like new.
>
> On 11 Apr 2005 09:57:02 -0700, "builderbos" <builderbos@yahoo.com>
> wrote:
>
>
>>I've used bleach comet against my best intentions with very good
>>results, but have been told it's too abrasive to use for this kind of
>>application.
>>
>>Any suggestions on whether or not it IS too abrasive, and/or any
>>alternatives? The tiles are dirty with (basically) soap-scum type of
>>dirt. The comet seems to readily restore the light blue color ridding
>>us of the brownish caking, and doesn't seem to scratch at all...but
>>perhaps it is.
>>
>>Any/all advice much appreciated, thanks.
>>
>>Thanks.
>
>
Not much, short of sandblasting will be too abrasive on ceramic tile.
The best way to rid yourself of soap scum is to rid yourself of soap.
Try some "body wash" or other non-soap cleanser.
Try using "clean shower" daily (now from Arm and Hammer) After you chip
all the old soap scum off, your shower will always look as if it has
been cleaned about two days ago.

builderbos
06-08-2005, 08:41 PM
win-ho-lee wrote:
> Phisherman wrote:
> > There are non-abrasive cleaners available. I like to use a
> > tile-and-tub pressurized foam spray. I spray it on, allow it to
work
> > for several hours, use a nylon-bristle scrub brush dipped in
> > household ammonia, and rinse with cold water. Doing this once a
week
> > prevents hard-to-clean buildup. My tub/shower surround is a
one-piece
> > fiberglass. I use a pump after-shower spray too. My clear vinyl
> > shower curtain goes in the laundry with rags, old towels, and
> > household bleach once a month. About 4 times a year I'll polish
the
> > chrome fixtures using Brasso that makes them look like new.
> >
> > On 11 Apr 2005 09:57:02 -0700, "builderbos" <builderbos@yahoo.com>
> > wrote:
> >
> >
> >>I've used bleach comet against my best intentions with very good
> >>results, but have been told it's too abrasive to use for this kind
of
> >>application.
> >>
> >>Any suggestions on whether or not it IS too abrasive, and/or any
> >>alternatives? The tiles are dirty with (basically) soap-scum type
of
> >>dirt. The comet seems to readily restore the light blue color
ridding
> >>us of the brownish caking, and doesn't seem to scratch at all...but
> >>perhaps it is.
> >>
> >>Any/all advice much appreciated, thanks.
> >>
> >>Thanks.
> >
> >
> Not much, short of sandblasting will be too abrasive on ceramic tile.

> The best way to rid yourself of soap scum is to rid yourself of soap.

> Try some "body wash" or other non-soap cleanser.
> Try using "clean shower" daily (now from Arm and Hammer) After you
chip
> all the old soap scum off, your shower will always look as if it has
> been cleaned about two days ago.

Interesting on the non-soap cleanser, I'll look into that.

Thanks on the rest too; I really hate using comet, but it's at a point
where it's the most effective thing I can find, with elbow grease.